Mazda CX-9 2021 Manual Download Page 517

Page: 517 / 720

Only use USB devices that have a
maximum power consumption of 12.5W
(DC5V, 2.5A) or below.

USB power outlet

CAUTION

To prevent USB power outlets damage or
electrical failure, pay attention to the
following:



Do not use USB devices that require more
than 12.5 W (DC 5 V, 2.5 A).



Correctly connect the USB connector into
the USB power outlets.

NOTE



The USB power outlets are designed
only for charging and they cannot be
used for connecting to the vehicle's
audio system.



To prevent discharging of the battery, do
not use the USB power outlets for long
periods with the engine off or idling.

Third-row seat

The USB power outlets can be used
regardless of whether the ignition is
switched to ACC or ON.

Only use USB devices that have a
maximum power consumption of 12.5W
(DC5V, 2.5A) or below.

USB power outlet

CAUTION

To prevent USB power outlets damage or
electrical failure, pay attention to the
following:



Do not use USB devices that require more
than 12.5 W (DC 5 V, 2.5 A).



Correctly connect the USB connector into
the USB power outlets.

NOTE



The USB power outlets are designed
only for charging and they cannot be
used for connecting to the vehicle's
audio system.



To prevent discharging of the battery, do
not use the USB power outlets for long
periods with the engine off or idling.

Interior Features

Interior Equipment

5-61

CX-9_8JK1-EA-20G_Edition2_old

2020-7-20 17:31:45

Summary of Contents for CX-9 2021

















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-9 2021

Reviews:

Related manuals for CX-9 2021

Brands by name

Popular brands

Mazda CX-9 2021, Manual

Search results

Summary of Contents for CX-9 2021

Reviews:

Related manuals for CX-9 2021

Brands by name

Popular brands