Mazda CX-9 2021 Manual Download Page 21 | Manualshive

Page: 21 / 720

background image

CAUTION

Do not place fingers or hands around the
bottom of the seat while the seat memory
function is operating. The seat moves
automatically while the seat memory
function is operating and fingers or hands
could get pinched and injured.

SET button

A driving position can be programmed or
operated using the buttons on the side of
the seat or the key.

NOTE



Lumbar support adjustment cannot be
programmed.



A driving position can be programmed
to the buttons on the side of the seat and
the key in use for driving the vehicle.



If the vehicle has been serviced and the
battery cables disconnected, the
programmed seat positions will have
been erased. Re-program the seat
positions.

Programming

1. Make sure the parking brake is on.
2. Make sure the selector lever is in the P

position.

3. Start the engine.

4. Adjust the seat and the active driving

display to the desired driving position.

5. Press the SET button on the seat until a

beep sound is heard 1 time.

6. Perform one of the following settings

within 5 seconds of completing step 5
above:



Programming using a button on
the side of the seat

Press the button you want to
program, either button 1 or 2, until a
beep sound is heard 1 time.



Programming using the key

Press the key unlock button until a
beep sound is heard 1 time.

NOTE

If a beep sound is heard 3 times, the
operation is canceled.

To move the driving position to a
programmed position

(Using a button on the side of the seat)

1. Make sure the parking brake is on.
2. Make sure the selector lever is in the P

position.

3. Start the engine.
4. Press the programming button for the

driving position you want to call up
(button 1 or 2).

5. A beep sound is heard when the

driving position adjustment is
completed.

NOTE



If the driving position movement is not
changed, only the beep sounds.



A seat position can be called up even
with the engine not running.



The driving position adjustment is
canceled in the following cases:

Essential Safety Equipment

Seats

2-11

CX-9_8JK1-EA-20G_Edition2_old

2020-7-20 17:31:45

«
...
19
20
21
22
23
...
»

Summary of Contents for CX-9 2021

















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CX-9 2021

Brand: LaserTrack Pages: 12

Brand: Metra Electronics Pages: 14

Brand: Vauxhall Pages: 199

Brand: Thule Pages: 8

Brand: Cadillac Pages: 522

Parrot MKi + ParrotCK3100 range LOGAN

Brand: Parrot Pages: 10

Brand: STARLANE Pages: 24

Brand: tams elektronik Pages: 19

Brand: HAKR Pages: 9

Escalade 2004 Escalade ESV

Brand: Cadillac Pages: 472

Brand: Phonocar Pages: 28

TuneBase F8Z442

Brand: Belkin Pages: 162

Brand: Menabo Pages: 8

Brand: Seat Pages: 372

Brand: Honda Pages: 326

Brand: Mazda Pages: 196

Brand: Skoda Pages: 288

Truck 2500 2018

Brand: RAM Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands