Mazda CX-8, Quick Manual

Page: 145 / 624

Function
number
Function *1
1
The auto door-lock function is disa-
bled.
2
All the doors and the liftgate lock au-
tomatically when the vehicle speed is
about 20 km/h (12 mph) or more.
3 (Factory
Setting)
All the doors and the liftgate lock au-
tomatically when the vehicle speed is
about 20 km/h (12 mph) or more. All
the doors and the liftgate unlock
when the ignition is switched from
ON to Off.
4
When the ignition is switched ON
and the selector lever is shifted from
park (P) to any other gear position, all
the doors and the liftgate lock auto-
matically.
5
When the ignition is switched ON
and the selector lever is shifted from
park (P) to any other gear position, all
the doors and the liftgate lock auto-
matically.
When the selector lever is shifted to
park (P) while the ignition is switched
ON, all the doors and the liftgate un-
lock automatically.
6
All the doors and the liftgate lock au-
tomatically when the vehicle speed is
about 20 km/h (12 mph) or more.
When the selector lever is shifted to
park (P) while the ignition is switched
ON, all the doors and the liftgate un-
lock automatically.
* 1 Other settings for the auto door lock function are
available at an expert repairer, we recommend
an Authorised Mazda Repairer. For details
consult an expert repairer, we recommend an
Authorised Mazda Repairer. Refer to
Personalisation Features on page 9-9.
Settings can be changed using the
following procedure.
1. Safely park the vehicle. All doors and
the liftgate must remain closed.
2. Switch the ignition ON.
3. Press and hold the lock side of the
door-lock switch within 20 seconds of
switching the ignition ON, and make
sure a beep sound is heard about eight
seconds afterwards.
4. Refer to the auto lock/unlock function
setting table, determine the function
number for the desired setting. Press
the unlock side of the door-lock switch
the same number of times as the
selected function number (Ex. If you
select function 2, press the unlock side
of the switch only 2 times).
5. Three seconds after the function
setting has been changed, a beep sound
will beep in the amount of the selected
function number. (Ex. Function
number 3 = 3 beep sounds)
P ress u nlock side of
lock switch once
P ress 2 times
P ress 3 times
C u rrent F u nction N u mber
F u nction N u mber 1
F u nction N u mber 2
P ress 4 times
F u nction N u mber 3
P ress 5 times
F u nction N u mber 4
P ress 7 times
F u nction N u mber 5
P ress 6 times
F u nction N u mber 6
Cancel settin g
Cancel settin g
F u nction set (The
n u mber of beeps
heard is the same as
the selected f
u nction
n u mber)
P ress lock side of
lock switch
Wait for 3 second
Before Driving
Doors and Locks
3-13
CX-8_8HJ9-EI-19E_Edition2_old 2020-4-15 13:00:04