Mazda CX-8 Quick Manual Download Page 500

Page: 500 / 624

3. Insert the tape-wrapped flathead

screwdriver into the gap and slide it in
the direction of the arrow.

Cover

Gap

4. Twist the flathead screwdriver in the

direction of the arrow and remove the
cover.

Cover

5. Remove the battery cap, then remove

the battery.

CAUTION



Be careful not to allow the rubber
ring shown in the figure to be
scratched or damaged.



If the rubber ring detaches, reattach
it before inserting a new battery.

Rubber ring

6. Insert a new battery with the positive

pole facing up, and then cover the
battery with the battery cap.

7. Close the cover.

8. Reinsert the auxiliary key.

Maintenance and Care

Owner Maintenance

6-30

CX-8_8HJ9-EI-19E_Edition2_old

2020-4-15 13:00:04

Summary of Contents for CX-8

















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-8

Reviews:

Related manuals for CX-8

Brands by name

Popular brands

Mazda CX-8, Quick Manual

Search results

Summary of Contents for CX-8

Reviews:

Related manuals for CX-8

Brands by name

Popular brands