Mazda CX-8, Quick Manual

Page: 137 / 624

The beep sound activates at the
currently set volume. The setting
changes each time the LOCK button on
the key is pressed and the beep sound
activates at the set volume. (If the beep
sound has been set to not activate, it
will not activate.)
4. The setting change is completed by
doing any one of the following:

Switching the ignition to ACC or
ON.

Closing the driver's door.

Opening the liftgate.

Not operating the key for ten
seconds.

Pressing any button except the
LOCK button on the key.

Pressing a request switch.
The operation indicator light flashes when
the buttons are pressed.
Lock button
To lock the doors and the liftgate, press the
lock button and the hazard warning lights
will flash once.
A beep sound will be heard once.
NOTE

The doors and the liftgate cannot be
locked by pressing the lock button while
any other door or the liftgate is open.
The hazard warning lights will also not
flash.

Make sure all doors and the liftgate are
locked after pressing the button.

When the doors are locked by pressing
the lock button on the key while the
theft-deterrent system is armed, the
hazard warning lights will flash once to
indicate that the system is armed.
Unlock button
To unlock the doors and the liftgate, press
the unlock button and the hazard warning
lights will flash twice.
A beep sound will be heard twice.
NOTE

(Auto re-lock function)
After unlocking with the key, all doors
and the liftgate will automatically lock if
any of the following operations are not
performed within about 30 seconds.The
hazard warning lights will flash.
The time required for the doors to lock
automatically can be changed.
Refer to Personalisation Features on
page 9-9.

A door or the liftgate is opened.

The ignition is switched to any
position other than off.

When the doors are unlocked by
pressing the unlock button on the key
while the theft-deterrent system is turned
off, the hazard warning lights will flash
twice to indicate that the system is
turned off.
Power liftgate button *
To open/close the liftgate, press the power
liftgate button for one second or longer
with the liftgate in the fully closed/open
position.
Before Driving
Keys
*Some models.
3-5
CX-8_8HJ9-EI-19E_Edition2_old 2020-4-15 13:00:04