Mazda CX-8 Quick Manual Download Page 507

Page: 507 / 624

4. Pull the centre of each plastic retainer

using a flathead screwdriver and
remove the retainers, and then partially
peel back the mudguard.

Removal

Installation

5. Turn the socket and bulb assembly

anticlockwise and remove it.

6. Disconnect the bulb from the socket.

7. Install the new bulb in the reverse

order of the removal procedure.

Rear direction indicator lights

1. Make sure the ignition is switched off,

and the direction indicator switch is
off.

2. Wrap a small flathead screwdriver with

a soft cloth to prevent damage to the
cover, and then remove the cover with
the flathead screwdriver.

3. Turn the screws anticlockwise and

remove them.

4. Pull the unit rearward to remove it.

5. Turn the socket and bulb assembly

anticlockwise and remove it.

Maintenance and Care

Owner Maintenance

6-37

CX-8_8HJ9-EI-19E_Edition2_old

2020-4-15 13:00:04

Summary of Contents for CX-8

















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-8

Reviews:

Related manuals for CX-8

Brands by name

Popular brands

Mazda CX-8, Quick Manual

Search results

Summary of Contents for CX-8

Reviews:

Related manuals for CX-8

Brands by name

Popular brands