manualshive.com logo in svg

Mazda CX-8, Quick Manual

The Ayre CX-8 offers a remarkable audio experience. Enhance your ownership by downloading the free, comprehensive Owner's Manual from manualshive.com. This manual provides detailed instructions and insights, ensuring you make the most of this exceptional product. Experience it all with Ayre CX-8 and its accompanying user manual.

Share
Download
background image

Due to variations in the design of
child-restraint systems, vehicle seats
and seat belts, all child-restraint systems
may not fit all seating positions. Before
purchasing a child-restraint system, it
should be tested in the specific vehicle
seating position (or positions) where it
is intended to be used. If a previously
purchased child-restraint system does
not fit, you may need to purchase a
different one that will.

Baby seat

Equal to Group 0 and 0  of the UN-R 44
and UN-R 129 regulation.
 

Child seat

Equal to Group 1 of the UN-R 44 and
UN-R 129 regulation.
 

Junior seat

Equal to Group 2 and 3 of the UN-R 44
and UN-R 129 regulation.
 

When using a booster seat, always 
install the vehicle head restraint to 
the seat where the booster seat is 
installed.

Booster seat

*

1

*

1

▼

Baby Seat Installation Position

A baby seat is used in the rear-facing
position only.
 

Refer to the table, “Child-Restraint System
Suitability for Various Seat Positions” for
baby seat installation position (page
2-46).

Essential Safety Equipment

Child Restraint

2-42

CX-8_8HJ9-EI-19E_Edition2_old

2020-4-15 13:00:04

Summary of Contents for CX-8

















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CX-8

Panasonic SL-SX451C Operating Instructions preview
SL-SX451C
Brand: Panasonic Pages: 2
Panasonic CYRC50U - UNIVERSAL REAR-VIEW CAMERA Manual De Instrucciones preview
CYRC50U - UNIVERSAL REAR-VIEW CAMERA
Brand: Panasonic Pages: 20
Panasonic CF-WEB Series Setting Manual preview
CF-WEB Series
Brand: Panasonic Pages: 12
JASTEC von-S2 Instruction Manual preview
von-S2
Brand: JASTEC Pages: 12
Jeep 2011 grand cherokee Accessories Quick Reference Manual preview
2011 grand cherokee
Brand: Jeep Pages: 22
Jeep 2013 Grand Cherokee Owner'S Manual preview
2013 Grand Cherokee
Brand: Jeep Pages: 704
Jeep 2012 Liberty Owner'S Manual preview
2012 Liberty
Brand: Jeep Pages: 558
Saab B205 Installation Instructions Manual preview
B205
Brand: Saab Pages: 10
Triumph MAYFLOWER 1951 Instruction Book preview
MAYFLOWER 1951
Brand: Triumph Pages: 86
Kia CADENZA 2019 Features & Functions Manual preview
CADENZA 2019
Brand: Kia Pages: 54
Metra Electronics 99-9001 Installation Instructions preview
99-9001
Brand: Metra Electronics Pages: 2
TrailFX A4012S Installation Instructions Manual preview
A4012S
Brand: TrailFX Pages: 6
GMC ANDROID INTERFACE Instruction Manual preview
ANDROID INTERFACE
Brand: GMC Pages: 18
Prorack K496 Fitting Instructions For Basic Carrier preview
K496
Brand: Prorack Pages: 15
BESAFE iZi Flex Manual preview
iZi Flex
Brand: BESAFE Pages: 4
Compass 02106 Manual preview
02106
Brand: Compass Pages: 16
SuperATV Roof Installation Instructions Manual preview
Roof
Brand: SuperATV Pages: 7
T-Mobile SyncUP DRIVE Start Manual preview
SyncUP DRIVE
Brand: T-Mobile Pages: 2

Brands by name

Popular brands

Load more brands