Mazda cx-5 2016 Manual Download Page 489

Page: 489 / 620

Black plate (489,1)

Luggage compartment light

1. Wrap a small flathead screwdriver with

a soft cloth to prevent damage to the
lens and remove the lens unit by
carefully prying on the edge of the lens
unit with the flathead screwdriver.

2. Disconnect the electrical connector

from the bulb by pressing the tab on
the connector with your finger and
pulling the connector.

CAUTION

When replacing the bulb always
disconnect the connector first.
Otherwise, electric and electronic
devices could be shorted.

3. Insert the flathead screwdriver into the

gap between the lens and the lens unit,
and then slide the screwdriver to detach
the lens.

4. Disconnect the bulb by pulling it out.

5. Install the new bulb in the reverse order

of the removal procedure.

Maintenance and Care

Owner Maintenance

6-57

CX-5_8DV2-EA-14K_Edition5 Page489
Tuesday, November 24 2015 8:50 AM

Form No.8DV2-EA-14K

Summary of Contents for cx-5 2016













































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for cx-5 2016

Reviews:

Related manuals for cx-5 2016

Brands by name

Popular brands

Mazda cx-5 2016, Manual

Search results

Summary of Contents for cx-5 2016

Reviews:

Related manuals for cx-5 2016

Brands by name

Popular brands