Mazda cx-5 2016 Manual Download Page 270

Page: 270 / 620

Black plate (270,1)

NOTE

In the following cases, the Forward Sensing Camera (FSC) cannot detect target objects correctly,
and each system may be unable to operate normally.

The height of the vehicle ahead is low.

You drive your vehicle at the same speed as the vehicle ahead.

Headlights are not turned on during the night or when going through a tunnel.

In the following cases, the Forward Sensing Camera (FSC) may not be able to detect target
objects correctly.

When driving next to walls with no patterning (including fences and longitudinally striped
walls).

The taillights of the vehicle ahead are turned off.

A vehicle is outside the illumination range of the headlights.

The vehicle is making a sharp curve, or ascending or descending a steep slope.

Entering or exiting a tunnel.

Heavy luggage is loaded causing the vehicle to tilt.

Strong light is shone at the front of the vehicle (back light or high-beam light from on-coming
vehicles).

There are many light emitters on the vehicle ahead.

When the vehicle ahead is not equipped with taillights or the taillights are turned off at
nighttime.

The vehicle ahead has a special shape.

4-136

When Driving

i-ACTIVSENSE

CX-5_8DV2-EA-14K_Edition5 Page270
Tuesday, November 24 2015 8:48 AM

Form No.8DV2-EA-14K

Summary of Contents for cx-5 2016













































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for cx-5 2016

Reviews:

Related manuals for cx-5 2016

Brands by name

Popular brands

Mazda cx-5 2016, Manual

Search results

Summary of Contents for cx-5 2016

Reviews:

Related manuals for cx-5 2016

Brands by name

Popular brands