Mazda cx-5 2016 Manual Download Page 445

Page: 445 / 620

Black plate (445,1)

Scheduled Maintenance (Mexico)

Follow Schedule 1 if the vehicle is operated mainly where none of the following conditions
apply.

Repeated short-distance driving

Driving in dusty conditions

Driving with extended use of brakes

Driving in areas where salt or other corrosive materials are used

Driving on rough or muddy roads

Extended periods of idling or low-speed operation

Driving for long periods in cold temperatures or extremely humid climates

Driving in extremely hot conditions

Driving in mountainous conditions continually

If any do apply, follow Schedule 2.

NOTE

After the prescribed period, continue to follow the described maintenance at the recommended
intervals.

Maintenance and Care

Scheduled Maintenance

6-13

CX-5_8DV2-EA-14K_Edition5 Page445
Tuesday, November 24 2015 8:50 AM

Form No.8DV2-EA-14K

Summary of Contents for cx-5 2016













































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for cx-5 2016

Reviews:

Related manuals for cx-5 2016

Brands by name

Popular brands

Mazda cx-5 2016, Manual

Search results

Summary of Contents for cx-5 2016

Reviews:

Related manuals for cx-5 2016

Brands by name

Popular brands