Mazda cx-5 2016 Manual Download Page 233

Page: 233 / 620

Black plate (233,1)

When the System Operates

1. The system goes on operation standby

when the LDWS switch is pressed and
the LDWS OFF indication/indicator
light turns off.

On the type A instrument cluster, the lane
indication (border line) is indicated in the
multi-information display.

Indication on display

2. Drive the vehicle in the center of the

driving lane while the LDWS OFF
indicator light is turned off. The system
becomes operational when all of the
following conditions are met.

The vehicle is driven in the center of
the driving lane with the white or
yellow lines on the left and right sides,
or on either side.

The vehicle speed is 65 km/h (41 mph)
or faster.

The vehicle is driven on a straight road
or road with gentle curves.

On the type A instrument cluster, the lane
indication is indicated in the multi-
information display.

Indication on display

The LDWS does not operate in the
following cases:

The system cannot detect white or
yellow lines.

The vehicle speed is less than 60 km/h
(37 mph).

The vehicle is making a sharp curve.

The vehicle is making a curve at an
inadequate speed.

When Driving

i-ACTIVSENSE

4-99

CX-5_8DV2-EA-14K_Edition5 Page233
Tuesday, November 24 2015 8:47 AM

Form No.8DV2-EA-14K

Summary of Contents for cx-5 2016













































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for cx-5 2016

Reviews:

Related manuals for cx-5 2016

Brands by name

Popular brands

Mazda cx-5 2016, Manual

Search results

Summary of Contents for cx-5 2016

Reviews:

Related manuals for cx-5 2016

Brands by name

Popular brands