Mazda cx-5 2016, Manual

Page: 378 / 620

Black plate (378,1)
Tutorial
The tutorial explains how to use
Bluetooth
®
Hands-Free. To activate the
tutorial, do the following:
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep]
“
Tutorial
”
3. Follow the prompts to receive the
appropriate voice guidance
instructions.
Commands useable anytime during
voice recognition
“
Help
”
or
“
Go Back
”
are commands
which can be used at anytime during
voice recognition.
Help function use
The help function informs the user of all
the available voice commands under the
current conditions.
1. Say: [Beep]
“
Help
”
2. Follow the prompts to receive the
appropriate voice guidance
instructions.
Returning to previous operation
This command is for returning to the
previous operation while in the voice
recognition mode.
Say:
[Beep]
“
Go Back
”
To prevent a deterioration in the voice
recognition rate and voice quality, the
following points should be observed:
l
The voice recognition cannot be
performed while voice guidance or
the beep sound is operating. Wait
until the voice guidance or the beep
sound is finished before saying your
commands.
l
Dialects or different wording other than
Hands-Free prompts cannot be
recognized by voice recognition. Speak
in the wording specified by the voice
commands.
l
It is not necessary to face the
microphone or approach it. Speak the
voice commands while maintaining a
safe driving position.
l
Do not speak too slow or too loud.
l
Speak clearly, without pausing between
words or numbers.
l
Close the windows and/or the
moonroofto reduce loud noises from
outside the vehicle, or turn down the
airflow of the air-conditioning system
while Bluetooth
®
Hands-Free is being
used.
l
Make sure the vents are not directing
air up towards the microphone.
NOTE
If the voice recognition performance is not
satisfactory.
Refer to Voice Recognition Learning Function
(Speaker Enrollment) (Type A) on page 5-84.
Refer to Troubleshooting on page 5-124.
q
Security Setting (Type A)
If a passcode is set, the system cannot be
activated unless the passcode is input.
NOTE
Do this function only when parked. It is too
distracting to attempt while driving and you
may make too many errors to be effective.
Passcode setting
1. Press the pick-up button or talk button
with a short press.
2.
Say:
[Beep]
“
Setup
”
5-82
Interior Features
Bluetooth®
CX-5_8DV2-EA-14K_Edition5 Page378
Tuesday, November 24 2015 8:49 AM
Form No.8DV2-EA-14K