Mazda cx-5 2016, Manual

Page: 463 / 620

Black plate (463,1)
Inspect the antifreeze protection and
coolant level in the coolant reservoir at
least once a year
―
at the beginning of the
winter season
―
and before traveling
where temperatures may drop below
freezing.
Inspect the condition and connections of
all cooling system and heater hoses.
Replace any that are swollen or
deteriorated.
The coolant should be at full in the
radiator and between the F and L marks
on the coolant reservoir when the engine
is cool.
If it is at or near L, add enough coolant to
the coolant reservoir to provide freezing
and corrosion protection and to bring the
level to F.
Securely tighten the coolant reservoir tank
cap after adding coolant.
CAUTION
Ø
Radiator coolant will damage
paint.
Rinse it off quickly if spilled.
Ø
Use only soft (demineralized)
water in the coolant mixture.
Water that contains minerals will
cut down on the coolant's
effectiveness.
Ø
Do not add only water. Always
add a proper coolant mixture.
Ø
The engine has aluminum parts
and must be protected by an
ethylene-glycol-based coolant to
prevent corrosion and freezing.
Ø
DO NOT USE coolants Containing
Alcohol, methanol, Borate or
Silicate.
These coolants could damage the
cooling system.
Ø
DO NOT MIX alcohol or methanol
with the coolant. This could
damage the cooling system.
Ø
Do not use a solution that
contains more than 60%
antifreeze.
This would reduce effectiveness.
Ø
If the
“
FL22
”
mark is shown on or
near the cooling system cap, use of
FL-22 is recommended when
replacing engine coolant. Using
engine coolant other than FL-22
may cause serious damage to the
engine and cooling system.
Maintenance and Care
Owner Maintenance
6-31
CX-5_8DV2-EA-14K_Edition5 Page463
Tuesday, November 24 2015 8:50 AM
Form No.8DV2-EA-14K