Mazda cx-5 2016 Manual Download Page 266 | Manualshive

Page: 266 / 620

background image

Black plate (266,1)

NOTE

l

The Smart Brake Support (SBS) system operates when all of the following conditions are met:

l

The ignition is switched ON.

l

The Smart Brake Support (SBS) system is on.

l

The vehicle speed is about 15 km/h or faster (10 mph or faster).

l

The relative speed between your vehicle and the vehicle ahead is about 15 km/h or faster (10
mph or faster).

l

The Dynamic Stability Control (DSC) is not operating.

l

The Smart Brake Support (SBS) system may not operate under the following conditions:

l

If the vehicle is accelerated rapidly and it comes close to a vehicle ahead.

l

The vehicle is driven at the same speed as the vehicle ahead.

l

The accelerator pedal is depressed.

l

The brake pedal is depressed.

l

The steering wheel is being operated.

l

The selector lever is being operated.

l

The turn signal is being used.

l

When the vehicle ahead is not equipped with taillights or the taillights are turned off.

l

When warnings and messages, such as a dirty windshield, related to the Forward Sensing
Camera (FSC)/laser sensor (front) are being displayed in the multi-information display.

l

Although the objects which activate the system are four-wheeled vehicles, the radar sensor could
detect the following objects, determine them to be an obstruction, and operate the Smart Brake
Support (SBS) system.

l

Objects on the road at the entrance to a curve (including guardrails and snow banks).

l

A vehicle appears in the opposite lane while cornering or rounding a curve.

l

When crossing a narrow bridge.

l

When passing under a low gate or through a tunnel or narrow gate.

l

When entering an underground parking area.

l

Metal objects, bumps, or protruding objects on the road.

l

If you suddenly come close to a vehicle ahead.

l

When driving in areas where there is high grass or forage.

l

Two-wheeled vehicles such as motorbikes or bicycles.

l

Pedestrians or non-metallic objects such as standing trees.

l

When the system operates, the user is notified by the multi-information display.

4-132

When Driving

i-ACTIVSENSE

CX-5_8DV2-EA-14K_Edition5 Page266
Tuesday, November 24 2015 8:48 AM

Form No.8DV2-EA-14K

«
...
264
265
266
267
268
...
»

Summary of Contents for cx-5 2016













































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for cx-5 2016

Brand: Harbor Freight Tools Pages: 4

Brand: Vauxhall Pages: 2

Brand: Vauxhall Pages: 2

Brand: Vauxhall Pages: 2

Brand: Vauxhall Pages: 209

Brand: VBC Racing Pages: 34

2013 Corsa Infotainment system

Brand: Vauxhall Pages: 2

Brand: Vauxhall Pages: 2

Brand: Vauxhall Pages: 236

Brand: Yakima Pages: 12

Brand: JEHNERT SOUND DESIGN Pages: 8

Experience Series

Brand: Rainbow Pages: 19

Brand: Yakima Pages: 12

FleetMaster Air FW8 Series

Brand: SAF-HOLLAND Pages: 20

Brand: Alpine Pages: 8

Chevrolet Silverado 2500HD 2021

Brand: GMC Pages: 433

Brand: ideus Pages: 159

TRI-FOLD PG9300RF

Brand: Pet Gear Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands