■
Installation instructions (For BT-50 only)
：
BT-50
－
4
1. Reconnect the negative battery cable.
3. CONNECTION CHECK
Connect the negative battery cable carefully so that it does not interfere with other parts.
If the battery is disconnected, the automatic full open/close feature of the power windows is disabled.
This feature can be reactivated using the following procedure.
1. Turn the ignition switch to the ON position.
2. Hold down the power window switch until the window is fully open.
3. Pull up the power window switch to close the window and continue to pull it up for about two seconds after it is fully
closed.
4. If the feature does not function even after the ignition switch is turned off, contact an Authorized Mazda Dealer.
CAUTION
