■
Installation instructions (For New Mazda2 only)
New Mazda2
－
7
WIRING <Installation of iPod integration module and selector box>
(For vehicles with AUX terminal )
z
To prevent an open or short circuit in the wiring of the iPod integration module, be sure to route cables
avoiding sharp edges and burrs on the vehicle's sheet metal.
z
To ensure proper affixing, be sure to degrease the area where the double-sided adhesive tape is to be
adhered.
z
After fixing a cable with a tie wrap, cut off excess tie wrap using nippers. Otherwise it may interfere with
other parts causing failure or noise.
CAUTION
iPod connection cable
Selector box
Harness (c)
Harness (a)
(To audio unit)
Harness (b)
(To AUX connector)
iPod integration module
Harness (a) (To audio unit)
Harness (b) (To AUX connector)
Approx. 15 cm
○
A
Put iPod
connection
cable in
glove box
(Cable 30
cm from
instrument
panel)
Fit connector cover when
iPod is not connected
Vehicle front
Tie wrap
(small)
iPod integration module
Tie wrap (small)
○
C
○
B
○
C
Tie wrap (small)
Harness (c)
Vehicle front
Harness (c)
○
A
○
B
Harness (a)
Harness (b)
Tie wrap (large)
Selector box
Vehicle front