■
Installation instructions (For Mazda5 only)
Mazda5
−
1
Negative battery terminal disconnection
1. Disconnect the negative battery cable and wrap its terminal with tape to insulate it.
Side wall (driver's side and passenger's side) removal
1. Disengage clips A (3 locations).
2. Disengage the tab and remove the side wall.
Front console removal
1. Remove the shift knob.
2. Lift the shift panel, disengage the clips, and then remove the
shift panel from the front console.
3. Remove the screws (4).
4. Pull the front console outward and disengage clips A and tabs
B.
5. Disconnect the cigarette lighter connector and remove the
front console.
Clip A
Shift panel
A
A
A
A
Shift knob
1. VEHICLE PARTS REMOVAL
z
A short circuit while performing work may cause damage to parts, electric shock or other injury. Be sure to
disconnect the negative battery cable and do not allow the terminal to contact any other parts.
WARNING
Side wall
Ａ
Clip A
Ａ
Ａ
Handle with care as it can break easily
Screw
Front console
Screw
Clip A
Tab B
B
A
A
B
A
B
B
B
B
A
A
A
Screw
A
z
The procedure described here is for a right-hand drive vehicle, however, perform work in the same manner
for a left-hand drive vehicle as well.
NOTE
1ED6P11A13400
GE
