■
Installation instructions (For MX-5 only)
MX-5
－
1
Negative battery terminal disconnection
1. Disconnect the negative battery cable and wrap its terminal with tape to insulate it.
Scuff plate (passenger’s side) removal
1. Pull the scuff plate upward while detaching tabs C, and then
detach clips A (4), pins B (4),
and D (1) from the body, and
remove the scuff plate.
Side trim (passenger's side) removal
1.
Remove the seaming welt.
2.
Remove the fastener (1).
3.
Pull the side trim toward you, detach clip A (1 location)
and pin B (1 location), and then remove the side trim.
Clip A
Fastener
A
B
Pin B
Vehicle front
Seaming welt
Side trim
1. VEHICLE PARTS REMOVAL
Scuff plate
Pin D
Pin C
Tab C
Clip A
Vehicle front
A
A
Ａ
A
B
B
B
B
C
C
D
A short circuit while performing work may cause damage to parts, electric shock or other injury. Be sure to
disconnect the negative battery cable and do not allow the terminal to contact any other parts.
WARNING
The procedure described here is for a right-hand drive vehicle, however, perform work in the same manner
for a left-hand drive vehicle as well.
NOTE
1ED6P11A08400
