■
Installation instructions (For Mazda5 only)
Mazda5
−
4
WIRING <Installation of iPod integration module>
For LEFT hand drive vehicle
z
To prevent an open or short circuit in the wiring of the iPod integration module, be sure to route cables
avoiding sharp edges and burrs of the vehicle's sheet metal.
z
To ensure proper affixing, be sure to degrease the area where the double-sided adhesive tape is
affixed.
z
After fixing a cable with a tie wrap, cut off excess tie wrap using nippers. Otherwise it may interfere with
other parts causing failure or noise.
CAUTION
iPod integration module
Loop redundant part of cable and
secure with pad protectors
Harness (c)
iPod connection cable
○
A
Vehicle front
Harness (c) (To audio unit)
(Route harness so that
this part is approx. 170 mm)
Approx.
170 mm
Tie wrap (small)
Vehicle
front
Pad protector
○
A
○
B
○
C
Vehicle
front
Put iPod connection cable in glove box
(Cable 30 cm from instrument panel)
○
B
Remove connector cover when connecting iPod;
fit connector cover when iPod is not used
Double-sided
adhesive tape (1 pc.)
Pad protector
Loop redundant part
Vehicle front
iPod integration
module
Pad protector
○
C
