■
Installation instructions (For Mazda CX-7 only)
：
CX-7
−
4
Center panel removal
1. Remove the clips B (2 locations).
2. Pull the center panel outward and detach clips A (10 locations).
3. Remove the center panel.
Center panel module removal
1. Remove the screws (4 locations).
2. Pull the center panel module outward slowly and detach pins A
(2 locations), and clips B (2 locations).
3. Disconnect the audio side connectors (2 locations), antenna
feeder, and hazard switch connector, and then remove the
center panel module.
z
Do not apply excessive force when pulling out the center
panel; otherwise it could cause an open circuit.
CAUTION
Center panel module
Vehicle front
Pins A
Screws
Clips B
Antenna feeder
Audio side connectors
Hazard switch connector
Center panel
Clips B
Clips A
Flathead screwdriver
Vehicle front
