■
Installation instructions (For Mazda CX-7 only)
：
CX-7
−
2
Console removal
1. Remove the shift knob.
2. Pull the panel upward and detach clips A (2 locations), clips B
(6 locations) and tabs C (2 locations).
3. Disconnect the accessory socket connector.
4. Disconnect the seat warmer switch connectors (vehicles with
seat warmer system)
5. Remove the panel.
6. Remove the covers (4 locations).
7. Remove the fasteners (2 locations) and screws (8 locations).
8. Remove the pins A (4 locations).
9. Remove the console
.
Glove compartment removal
1. Press the stay damper in the direction shown by the arrow
and detach it from the glove compartment lid.
2. Bend the stoppers inward to remove.
3. Turn the glove compartment downward and pull the pins.
4. Remove the glove compartment.
Lower panel (front passenger side) removal
1. Pull the cover outward and detach the tabs.
2. Remove the cover.
Clips B
Panel
Tabs C
Clips A
Console
Pins A
Console
Cover
Screws
Screw
Screw
Cover
Cover
Fastener
Screws
Cover
Tab
Cover
Vehicle front
Stopper
Stay damper
Glove
compartment
Pin
Pin