3
GB
can reduce the risk of injury.
•
Accidental c
of the device is not allowed. Electric tool shall be guaranteed to be in o
ff
state
before it is connected with power supply or storage ba ery and before it is li ed or moved. If
fin
gers touch
the switch or the disconnected tools are connected with power supply during the moving process of the
electric tools, unfortunate accidents may happen.
•B
efore the electric tool is connected, all adjustment tools and nut wrench of it shall be taken down
fi
rst. If
un
fi
xed nut wrench and adjustable wrench fall into rolling parts, they will cause harm.
•T
he device shall not be dragged and shall be kept in stable
and balance during the use, which
thus can be be er controlled in unpredictable situa
•D
ressing shall be standard without loose clothes or accessories. Your hair, clothes and gloves shall always
be away from rolling parts because loose clothes, accessories or long hair may be drawn into the moving
parts of the device.
•
If there are devices which can be used to connect with dust collectors or dust exhausters, they must be
guaranteed to be connected and used correctly.
The
use of dust collectors can reduce the risk probability
that is related with dusts.
•When
machines are in normal opera
or abrasive discs are rota g, hands or other parts of body shall
not touch them un
stop running to avoid injury.
SPECIAL SAFETY RULES OF ELECTRIC ROUTER
1.
T
ools shall be picked up and put down very carefully.
2.
T
ools shall be carefully examined whether there are cracks or damage before they are operated, and
tools with cracks or damage shall be r
3. Nails shall be avoided to be cut.
W
orkpieces shall be examined and all nails shall be taken away before
the work.
4. D
evice shall be gr
htly by both hands.
5. Hands shall always be away from rolling parts.
6. Switches of tools shall be turned on before tools are guaranteed not to be connected with workpieces.
7.
W
orkpieces shall be observed whether there are drives because of the bad installa
of tools by blank
running for a while before they are actually processed.
8. Di
r
rota
feed-in of t
9. Time b
eyond the opera
controlled by hands without making machines run brokenly.
10. A er power supply is turned o
ff and
tools completely stops, workpieces can move the machines.
11.
W
orkpieces shall not be touched immediately a er the processing because tools are too hot to scald
the skin.
Before commencing work, check that the tool housing automatically rises to the maximum height and
OPERATING INSTRUCTION
Keep your hands and feet away from all
opening
Read the manual
Warning
Wear dusk mask
Do not dispose of old appliances in the
household garbage
SYMBOLS
