Max 1500 PRO, Installation Manual

Page: 6 / 40

Safety Loop
Entrapment Area
Entrapment Area
Mo
ving Gate Ca
n Cause
Serious Injury or Death
KEEP CLE
AR!
Ga
te may
move at any
time
without
prior
warning.
Do
not
let children operate
the
gat
e or
play
in the gate area.
This
entrance
is
for ve
hicles onl
y.
Pedestrians
must use separate
ent
rance.
Automatic Exit
Loop
Safety Loop
The operator is intended for use on a VEHICULAR slide gate ONLY. It is intended to be used WITH appropriate entrapment
protection safety devices and in-ground vehicle loop detection system. Pedestrians MUST use a separate entrance.
Pedestrians MUST use a separate entrance.
Gate operator IS NOT intended to be used on a PEDESTRIAN gate.
In-Ground Loops: Help
protect the gate operator
from accidentally opening
and/or closing on vehicles
in the gate’s path
OPENING Direction Photocell:
Helps guard against the opening
gate from entrapment between
wall and gate.
Entrapment sensors must be installed where entrapment or pinch point exist.
A minimum of TWO entrapment protection sensors MUST be installed, ONE in EACH
direction of gate travel or operator will NOT function.
Physical Stops:
Install on BOTH ends of
gate rail to limit the travel
of gate to the fully open
and fully closed positions.
OPENING Direction Reverse Edge: Helps guard against the opening gate from entrapment.
OPENING Direction Reverse Edge: Helps guard against the
opening gate from entrapment between wall and gate.
CLOSING Direction Photocell: Helps
guard against the closing gate from
entrapment.
CLOSING Direction Reverse Edge: Helps guard
against the closing gate from entrapment.
Wire Mesh: 2” x 2” at least 6 ft high. Installed on gate when the space between the gate pickets is MORE than 2 1/4”.
Gate Pickets: The space between the gate pickets should be LESS than 2 1/4” or wire mesh should be installed.
Guide Rollers: Must be installed for safety.
Warning Signs: Should be installed on BOTH sides of gate area and easily visible.
Physical Stop
intended use of
slide gate operator
6
UL 325 2018 Standard - MAX 1500 PRO/2200 PRO/F18 PRO Matrix III Install Version 7
a
Safety - 5