MattairTech MT-X1 Manual Download Page 29

Page: 29 / 33

MTX1

Manual

Troubleshooting / FAQ

●

AVRDUDE 6.x does not yet support the MTX1S. A working patched version
can be found at

http://www.mattairtech.com/software/avrdude_6.0.1_patched_windows.zip

Thanks to Larry Viesse. For support on Linux 64bit, download

http://www.mattairtech.com/software/avrdude_6.0.1_patched_Linux_64.zip

For support on other Linux (especially with xhci (USB 3.0)), replace the usb_libusb.c file from
6.0.1 with

http://www.mattairtech.com/software/usb_libusb.c

●

If you are having problems communicating with the programmer using Atmel Studio 6.x,

download the Zadig USB driver manager at

http://zadig.akeo.ie/

Under options, List All Devices. The AVRISP mkII should show up in the list. Replace the

current driver with libusbwin32 (v1.2.6.0), which comes embedded with Zadig.
Alternatively, please use the procedure at

https://www.olimex.com/forum/index.php?

topic=4188.0

Support Information

Please check the MattairTech website (

http://www.MattairTech.com/

) for firmware and software

updates. Email me if you have any feature requests, suggestions, or if you have found a bug. If you
need support, please contact me (email is best). You can also find support information at the

MattairTech website. A support forum is planned. Support for AVRs in general can be found at
AVRfreaks (

http://www.avrfreaks.net/

). There, I monitor the forums section as the user physicist.

Justin Mattair

MattairTech LLC
PO Box 1079

Heppner, OR 97836 USA
541-626-1531

[email protected]
http://www.mattairtech.com/

Acknowledgments

Thanks to Dean Camera (

http://www.fourwalledcubicle.com/

) for his excellent LUFA library,

AVRISP mkII clone, and DFU bootloader, all of which are used in the MTX1 firmware. Thanks to the

members of AVRfreaks (

http://www.avrfreaks.net/

) for their support. Finally, thanks to Atmel for

creating a great product, the AVR microcontroller.

June 2, 2015

http://www.mattairtech.com/

Summary of Contents for MT-X1


































Search results

Summary of Contents for MT-X1

Reviews:

Related manuals for MT-X1

Brands by name

Popular brands

MattairTech MT-X1, Manual

Search results

Summary of Contents for MT-X1

Reviews:

Related manuals for MT-X1

Brands by name

Popular brands