MattairTech MT-X1, Manual

Page: 5 / 33

MT­X1 Manual
Advanced Waveform Extension on two Timer/Counters
Eight USARTs
IrDA modulation/demodulation for one USART
Four 2­Wire Interfaces w/ dual address match (I2C and SMBus)
Four SPI (Serial Peripheral Interface) peripherals
AES and DES Crypto Engine
16­bit Real Time Counter with separate Oscillator
Two Eight­channel, 12­bit, 2 Msps Analog to Digital Converters
Two Two­channel, 12­bit, 1 Msps Digital to Analog Converters
Four Analog Comparators with Window compare function
External Interrupts on all General Purpose I/O pins
Watchdog Timer with Separate On­chip Ultra Low Power Oscillator
●
Special Microcontroller Features
Power­on Reset and Programmable Brown­out Detection
Internal and External Clock Options with PLL and Prescaler
Programmable Multi­level Interrupt Controller
Sleep Modes: Idle, Power­down, Standby, Power­save, Ext. Stby.
Advanced Programming, Test and Debugging Interfaces
JTAG (IEEE 1149.1 Compliant)
PDI (Program and Debug Interface)
●
I/O and Packages
78 Programmable I/O Lines
100 ­ lead TQFP
●
Operating Voltage
(MT­X1 operates at 3.3V)
1.6 ­ 3.6V
●
Speed performance
(MT­X1 can operate at 0­32MHz)
0 ­ 12 MHz @ 1.6 ­ 3.6V
0 ­ 32 MHz @ 2.7 – 3.6V
Bottom View
June 2, 2015 5 http://www.mattairtech.com/