MTX1
Manual
You may also need to program the EEPROM. If so, click on Select EEPROM at the bottom.
Then, click on the File menu and open the appropriate eep file. You will have to change the file filter to
allow you to see the eep file. Note that eep files are just hex files but with the eep extension instead of
hex. More information will appear about the file when selected. Both Program and Verify should be
checked. Click run to program the EEPROM.
dfuprogrammer
TODO
Must erase chip first. Cannot read flash.
dfuprogrammer at90usb162 erase
dfuprogrammer at90usb162 flasheeprom MT_X1.eep (if applicable)
dfuprogrammer at90usb162 flash MT_X1.hex
June 2, 2015
28
