MTX1
Manual
Linux Installation
Linux Installation
Linux is supported as well. You must download and build the toolchain from the latest script
available at AVR Freaks on the AVR GCC Forum (Script for building AVR GCC sticky at
http://www.avrfreaks.net/index.php?name=PNphpBB2&file=viewtopic&t=42631
). All firmware written
for the MTX1S is developed under Linux using this toolchain.
Drivers
TODO (drivers should already be installed)
GCC Toolchain
TODO (see opening paragraph)
AVRDUDE
TODO (ie: avrdude p x128a1 c avrisp2 P usb U flash:w:"myfirmware.hex")
dfuprogrammer
TODO (must use version 0.5.2 or higher)
Terminal Emulator
TODO (can use minicom, config port (ie: /dev/tty/ACM0), save config, run with minicom o)
June 2, 2015
16
