MTX1
Manual
Next, build the project. Then, click on the Device Programming button. In the Device
Programming window, select the AVRISP mkII as the tool. If no tool appears, be sure that the MTX1
is plugged in and in programming mode (STS LED will be pulsing). Select the ATxmega128A1 as the
device and PDI as the interface and click Apply. You should now be connected to the AVRISP mkII
compatible programmer with serial number 000200012345. Now click Read next to Device signature.
It should match the device if all is well. It is recommended to always perform this step first to verify the
connection. The target voltage will always read 3.3V.
June 2, 2015
18
