70
Matrox Extio 3 Series – User Guide
Setting up point-to-point mode
Matrox Extio 3 transmitters and receivers can be configured as point-to-point extenders. In
point-to-point mode, Extio 3 transmitter and receiver devices are directly linked to each other using
copper or fiber optic cable.
Before you begin
Whenever you change your connection setup, make sure you’re using the correct
connectors and that all connectors are properly fastened. Also, don’t change connections
while your Extio transmitter and receiver are turned on. For more information,
“Connecting your Extio 3 devices”, page 28
Make sure all of your Extio 3 transmitter and receiver devices are using the latest version
of the Matrox Extio 3 firmware package.
To enable point-to-point mode, make sure your transmitter device and receiver device
are directly (physically) connected to each other. For more information,
your Extio 3 devices”, page 28
For information on supported cable types and distances,
(point-to-point mode)”, page 86
.
Review the safety information provided. For more information,
.
Software available in point-to-point mode
On-Screen Display (OSD)
