58
Matrox Extio 3 Series – User Guide
e
Select your stream from the
Dynamic sources
tab that appears between the
Sources
and
Receiver
tabs, then click
Connect
to connect to the transmitter associated with the
selected stream.
For more information, see
“Switching between dynamic sources”,
5
Configure the analog audio source for your streams by selecting the proper options for
your
Headphone
,
Line Out
, and
Source destination
options. For more information,
“Appendix D – Configuring your audio settings”, page 96
.
6
When you’re done, click
Apply
.
Editing the video streams in your monitor layout
To change the video streams in your current monitor layout:
1
In your current configuration, click
Cancel
Yes
.
2
On the
Sources
tab, next to
Aggregator mode
, click
Edit
.
3
Change your new monitor layout, then click
OK
.
4
Click the
Sources
tab. Change your video streams and configure the analog audio source
for your streams.
5
When you’re done, click
Apply
.
You can remove a video stream from your monitor layout by doing one of the following:
Right-clicking the video stream in the layout.
Dragging the video stream and dropping it anywhere outside of the layout.
Removing a layout
To remove a layout:
1
From the list of
Sources
, select the aggregator mode layout (
) you want to remove.
2
Next to
Aggregator mode
, click
Remove
.
3
When prompted, click
OK
to permanently remove the layout.
Switching between dynamic sources
You can change the dynamic source as frequently as you like.
Note:
Extio Central Manager
– Doing
may overwrite the audio settings
already configured through Extio Central Manager software. If audio was
already configured through Extio Central Manager, skip this step.
