Matan The SprinterB, User Manual

Page: 69 / 158

Preparing Your Printer for Printing Preliminary Preparations for Printing
Sprinter User's Manual 8-9
Figure 8-10: Placing the Ribbons into the system
9. Take the new R
IBBON
and put it in place of the R
IBBON
you have just
taken out.
10. Pull the R
IBBON
underneath the P
RINT
H
EAD
– to the outside of the A
NTI
-
STATIC
B
RUSH
(Figure 8-11).
11. Using adhesive tape, attach the edge of the new R
IBBON
to the empty
cardboard roll, at three points.
12. Close the T
OP
C
OVER
and from the C
ONTROL
dialog box, click the R
UN
button of the relative R
IBBON
. Ensure that the R
IBBON
is fed between
the A
NTI
-
STATIC
S
TRIP
and the T
AKE
-
UP
R
OLLER
.
Figure 8-11: Feeding the Ribbon under the Print Head
New Ribbon
New Ribbon
Anti-static Strip
Anti-static
Brush
Feed the new Ribbon down
and to the outside of the
Anti-static Brush. Ensure that the New Ribbon is
fed between the Anti-static Strip
and the Take-up Roller.
Unused
Ribbon
Unused Ribbon
(removed from its
correct location,
for clarity)