manualshive.com logo in svg

MasterCraft NXT20 2017, Owner'S Manual

The MasterCraft NXT20 2017 is a high-performance watercraft engineered with precision and crafted for thrill-seekers. With its cutting-edge features and impeccable design, this boat guarantees an unforgettable experience on the water. To unleash the full potential of this exceptional watercraft, make sure to download the detailed Owner's Manual for free from manualshive.com.

Share
Download
background image

2017 OWNERS MANUAL / 

282

CANVAS COVERS 

Models

MasterCraft offers several different styles of canvas covers for 
varying uses on all models. Bimini tops are designed to provide pro-
tection from the sun while operators and passengers are out on the 
water. Mooring or towing covers protect MasterCraft boats from the 
elements while being towed, moored by a dock, or in storage.  

Operation

Most covers are intended for use when the boat is moored or 
stored. These canvas covers will snap or ratchet into place. For 
information regarding bimini covers see the bimini section immedi-
ately following.  
 
 

Special Attention

MasterCraft strongly recommends that only authorized MasterCraft 

appears taut, an individual could become entangled in the line 
underwater, which could result in injury or death. It is also possible 
that people could cause the anchor to lose anchorage, causing 
the boat to move. If there is a current, the boat could become 
inaccessible to people in the water.

Whenever the anchor line is deployed, individuals in the water 
nearby should avoid the line. Disrupting the line could cause the 
boat to move away from the chosen anchorage location. It is also 
possible that individuals could become entangled in the anchor 
line. If underwater, this could result in serious injury or even death.

 
 

Special Attention 

MasterCraft suggests that operators monitor and verify the 
rewinding process to ensure that the line retracted in a smooth and 
even fashion. Anchors should never be pulled aboard and left on-
deck because this can lead to potentially dangerous situations. 
 
 
 

Improperly stored anchors and/or anchor lines that have been 
improperly rewound may create a hazardous situation. People on-
board can trip on improperly stored materials, which can result in 
injury. Improperly stored materials can also move too freely during 

boat operation and make contact with individuals, again causing 
injury. Properly store all anchors and lines whether the boat is in 
operation or not, any time the anchor and line are not in use. Never 
operate the boat with the anchor line deployed.

Troubleshooting

If the anchor line has been improperly rewound, have an authorized 
MasterCraft dealer assist in deploying and rewinding the line to its 
appropriate berth.

dealers perform the installation of snap-on canvas such as cockpit 
and tonneau covers. Improper installation of these covers can cause 
“crazing,” unwanted spider web-like cracks in the gel coat. Such dam-
age is not covered under warranty. 

 

Additional Special Attention 

On-going care is required to keep canvas material in good condition 
for the life of the boat. See Cleaning the Boat section of this Owner’s 
Manual for more information. 
 

Additional Special Attention 

Note that towing with unapproved covers on the boat may result 
in damage to the gel coat. MasterCraft recommends using only 
approved towable mooring covers when towing. Other canvas cov-
ers are available only through authorized MasterCraft dealers for a 
variety of uses.  

Summary of Contents for NXT20 2017















































































































































































































































Reviews:

No comments

Related manuals for NXT20 2017

Regal 2000 ES Owner'S Manual preview
2000 ES
Brand: Regal Pages: 352
Traxxas Spartan 57076-1 Owner'S Manual preview
Spartan 57076-1
Brand: Traxxas Pages: 30
Hobie Getaway Assembly Manual preview
Getaway
Brand: Hobie Pages: 40
Supra 2005 Comp LTS Owner'S Manual preview
2005 Comp LTS
Brand: Supra Pages: 74
Supra Comp Owner'S Manual preview
Comp
Brand: Supra Pages: 72
Sea-doo GTI Series Operator'S Manual preview
GTI Series
Brand: Sea-doo Pages: 180
White Formula Whisper User Manual preview
Whisper
Brand: White Formula Pages: 23
Peinert 25 Quick Start Manual preview
25
Brand: Peinert Pages: 4
Prestige 400 Owner'S Manual preview
400
Brand: Prestige Pages: 112
Prestige 350 Owner'S Manual preview
350
Brand: Prestige Pages: 116
World Cat 330TE 2013 Owner'S Manual preview
330TE 2013
Brand: World Cat Pages: 101
World Cat 2013 320CC Onwers Manual preview
2013 320CC
Brand: World Cat Pages: 95
Sabre Sabre 30 Owner'S Manual preview
Sabre 30
Brand: Sabre Pages: 81
Gumotex K2 User Manual preview
K2
Brand: Gumotex Pages: 44
BENETEAU OCEANIS 343 Owner'S Manual preview
OCEANIS 343
Brand: BENETEAU Pages: 28
BENETEAU Oceanis 351 Manual preview
Oceanis 351
Brand: BENETEAU Pages: 114
BENETEAU Oceanis 321 User Manual preview
Oceanis 321
Brand: BENETEAU Pages: 127
Walker Bay Genesis Owenrs Safety Manual preview
Genesis
Brand: Walker Bay Pages: 17

Brands by name

Popular brands

Load more brands