manualshive.com logo in svg

MasterCraft NXT20 2017, Owner'S Manual

The MasterCraft NXT20 2017 is a high-performance watercraft engineered with precision and crafted for thrill-seekers. With its cutting-edge features and impeccable design, this boat guarantees an unforgettable experience on the water. To unleash the full potential of this exceptional watercraft, make sure to download the detailed Owner's Manual for free from manualshive.com.

Share
Download
background image

2017 OWNERS MANUAL / 

358

measuring the oil level with the dipstick or aligning with a feeler 
gauge.

Inspect

Determine the operational readiness by examination, i.e., by sight, 
sound or feel.

Change

Tasks required periodically to keep the boat in proper operating 
condition, i.e., drain, replenish or service.

NEW BOAT BREAK-IN

 

 

NOTE: MasterCraft recommends the following functions be per-
formed by authorized MasterCraft technicians at an authorized 
MasterCraft dealer.

•  Check the alignment of the propeller shaft. (See Annual Mainte-

nance also.)

•  Have an authorized MasterCraft service department change 

the fuel filter after the first fifty (50) hours of operation, and 

then again at one hundred (100) hours. The fuel filter should be 

changed annually, even if less than one hundred (100) hours are 

run during the previous season.

MAINTENANCE

SERVICE

FREQUENCY AND SCHEDULED 

MAINTENANCE

Proper care, maintenance and adjustment will contribute to the 
peak performance of the MasterCraft boat, while also extending the 
overall service life and the resale value.

The pages that follow provide instructions on how to accomplish 
the required checks, inspections and services listed. An authorized 
MasterCraft service department is the best source for proper 
maintenance.

NOTE: The engine and drive train require scheduled maintenance 
checks and services in addition to the boat’s other maintenance 
requirements. Read and understand the engine owner’s manual 
that has been provided, and follow the maintenance schedule to 
ensure proper operation and quality service over the life of the boat 
and drive train. Failure to follow the maintenance requirements and 
instructions listed in this and all other manuals may result in dam-
age to the components, systems and equipment of the boat, which 
resulting damage will not be covered by warranty! Safety issues are 
also directly impacted by proper maintenance! 

Maintenance Definitions

Check

Verify the operational readiness by physical measurement, i.e., 

Summary of Contents for NXT20 2017















































































































































































































































Reviews:

No comments

Related manuals for NXT20 2017

MasterCraft Pro Star Owner'S Manual preview
Pro Star
Brand: MasterCraft Pages: 41
Sea-doo ISLANDIA Operation Manual preview
ISLANDIA
Brand: Sea-doo Pages: 130
Sea-doo GTX 4-GTI Operator'S Manual preview
GTX 4-GTI
Brand: Sea-doo Pages: 138
Sea-doo Islandia SE Operator'S Manual preview
Islandia SE
Brand: Sea-doo Pages: 144
Nauticstar Legacy 2102 Owner'S Manual preview
Legacy 2102
Brand: Nauticstar Pages: 80
Crivit IAN 71536 Instructions For Use Manual preview
IAN 71536
Brand: Crivit Pages: 38
Malibu Boats 2000 Owner'S Manual preview
2000
Brand: Malibu Boats Pages: 60
Malibu Boats 2009 21 vRide Owner'S Manual preview
2009 21 vRide
Brand: Malibu Boats Pages: 132
Nortik Packraft FamilyRaft Assembling Instruction preview
Packraft FamilyRaft
Brand: Nortik Pages: 9
Nortik Scubi 1 Assembling Instruction preview
Scubi 1
Brand: Nortik Pages: 11
Nortik fold Assembly Instruction Manual preview
fold
Brand: Nortik Pages: 29
Baja Performance H2X Owner'S Manual preview
Performance H2X
Brand: Baja Pages: 83
Scarab SB Series Owner'S Manual preview
SB Series
Brand: Scarab Pages: 182
Mercury 225 OptiMax Service Manual preview
225 OptiMax
Brand: Mercury Pages: 13
Najad 380 User Manual preview
380
Brand: Najad Pages: 44
Rave Sports Sea Rebel Owner'S Manual preview
Sea Rebel
Brand: Rave Sports Pages: 11
Yamaha SUPERJET 700 2005 Owner'S/Operator'S Manual preview
SUPERJET 700 2005
Brand: Yamaha Pages: 114
Yamaha WaveRunner FZR 2012 Owner'S/Operator'S Manual preview
WaveRunner FZR 2012
Brand: Yamaha Pages: 104

Brands by name

Popular brands

Load more brands