manualshive.com logo in svg

MasterCraft NXT20 2017, Owner'S Manual

The MasterCraft NXT20 2017 is a high-performance watercraft engineered with precision and crafted for thrill-seekers. With its cutting-edge features and impeccable design, this boat guarantees an unforgettable experience on the water. To unleash the full potential of this exceptional watercraft, make sure to download the detailed Owner's Manual for free from manualshive.com.

Share
Download
background image

2017 OWNERS MANUAL / 

228

Models

All. In addition to the standard mirror, an optional mirror featuring 
different styling is also available. All mirrors function in the same 
fashion.

Purpose

The mirror allows the boat operator to see behind the boat. While 
this is very helpful, it is not a substitute for an observer. Whenever 
there is a wake boarder or skier behind the boat, the operator must 
also have an observer facing aft and alerting the operator when the 
tow has been lost. There are specific hand signals for activities, and 
this information is available via U.S. Coast Guard pamphlets and 
website.

Location

Mirrors are mounted on the windshield extrusion (metal frame) in 
the driver’s compartment.

Operation

The mirror requires no operational procedure. It is adjustable, mov-
able from port to starboard and back, up and down. Each operator 
should adjust the mirror to his or her maximum aft sighting while 
seated. (Boats are not to be operated with the driver in any location 
but fully seated in the driver’s seat.)

HORN

Models

All

Purpose

The horn allows the boat operator to alert other boaters by way of a 
well-known and loud sound.

Location

The horn is sounded by means of a button on the instrument panel 
or driver’s armrest. It is a red button.

Special Attention

MasterCraft recommends boat owners and operators use 
only MasterCraft installed mirrors. While there are a number of 
mirrors available through marine retailers, the mirror provided by 
MasterCraft was selected to maximize the range of vision for the 
driver of MasterCraft boats. If it becomes necessary to replace a 
mirror, use only MasterCraft mirrors.  
 

Troubleshooting

If the mirror does not stay in place after it is adjusted to the driver’s 
comfort, verify that the hardware holding the mirror in place is 
secure. If the driver’s vision is obscured, be certain that the mirror 
is clean. Fingerprints, sun tan oil and a host of other common 
products found in boats can cause the mirror to become dirty and 
negatively affect the driver’s vision when using the mirror. Clean 
mirrors properly, as described in the Care and Maintenance section 
of this Owner’s Manual. 

Prior to operation of the boat, verify that the mirror hardware is 
secure. Failure to do so may result in the mirror detaching from 
the windshield extrusion. The mirror could hit the operator or a 
passenger, resulting in injury.

Operation

Pressing the button emits a loud and recognizable noise. 

Troubleshooting

If the horn does not sound, check the main circuit breaker panel 
to see whether the circuit has tripped and needs to be reset. If the 
circuit does not require resetting, there may be an issue elsewhere 
in the system. Present the boat to an authorized MasterCraft dealer 
for repair.

MIRRORS

Summary of Contents for NXT20 2017















































































































































































































































Reviews:

No comments

Related manuals for NXT20 2017

Walker Bay WB 8S Owner'S Safety Manual & Assembly Instructions preview
WB 8S
Brand: Walker Bay Pages: 13
Bennett Musto Performance Skiff Rigging Manual preview
Musto Performance Skiff
Brand: Bennett Pages: 19
Hydrospace S4 Standup Owner'S Manual preview
S4 Standup
Brand: Hydrospace Pages: 115
OVINGTON BOATS Musto Skiff Rigging Manual preview
Musto Skiff
Brand: OVINGTON BOATS Pages: 19
Sea-doo Bombardier GSX Limited 5625 Shop Manual preview
Bombardier GSX Limited 5625
Brand: Sea-doo Pages: 56
VBOATS FISHPRO Operating Manual preview
FISHPRO
Brand: VBOATS Pages: 72
Crivit Beach INSHORE 290 Instructions For Use Manual preview
Beach INSHORE 290
Brand: Crivit Pages: 46
Tiara Yachts FLYBRIDGE 53 2019 Owner'S Manual preview
FLYBRIDGE 53 2019
Brand: Tiara Yachts Pages: 172
World Cat 330TE 2013 Owner'S Manual preview
330TE 2013
Brand: World Cat Pages: 101
World Cat 2013 320CC Onwers Manual preview
2013 320CC
Brand: World Cat Pages: 95
BENETEAU OCEANIS 48 Owner'S Manual preview
OCEANIS 48
Brand: BENETEAU Pages: 164
PATHFINDER 2600 HPS Owner'S Manual preview
2600 HPS
Brand: PATHFINDER Pages: 29
Meridian Yachts 391SB Sedan Owner'S Manual preview
391SB Sedan
Brand: Meridian Yachts Pages: 100
Bayliner 300 CRUISER Owner'S Manual Supplement preview
300 CRUISER
Brand: Bayliner Pages: 96
Yamaha AR230 High output Owner'S/Operator'S Manual preview
AR230 High output
Brand: Yamaha Pages: 126
Yamaha 2004 WaveRunner FX Cruiser High Output Owner'S/Operator'S Manual preview
2004 WaveRunner FX Cruiser High Output
Brand: Yamaha Pages: 144
Walker Bay Airis Play Owners & Safety Manual preview
Airis Play
Brand: Walker Bay Pages: 18
Toyota Epic 21 Closed Bow Owner'S Manual preview
Epic 21 Closed Bow
Brand: Toyota Pages: 80

Brands by name

Popular brands

Load more brands