manualshive.com logo in svg

MasterCraft NXT20 2017, Owner'S Manual

The MasterCraft NXT20 2017 is a high-performance watercraft engineered with precision and crafted for thrill-seekers. With its cutting-edge features and impeccable design, this boat guarantees an unforgettable experience on the water. To unleash the full potential of this exceptional watercraft, make sure to download the detailed Owner's Manual for free from manualshive.com.

Share
Download
background image

2017 OWNERS MANUAL / 

224

ADDITIONAL 

SAFETY 

SUPPORT

FIRE SUPPRESSION AND 

EXTINGUISHING

See also the Safety section of this Owner’s Manual.

Models

All

 
Opening an engine compartment when there is indication of a fire 
inside can cause the fire to flare up and/or spread, which may 
result in serious injury or death to people onboard.

 Never attempt to fight a fire with your hands, feet, clothing 
or other material on-board the boat, other than approved fire 
suppression or fire extinguishing products as specified by 

MasterCraft. Failure to follow directions as outlined in this section 
can result in serious injury or death.

Purpose

MasterCraft has developed an extensive fire suppression and ex-
tinguishing system for its boats. All MasterCraft boats are equipped 
with an automatic fire suppression system. The automatic system 
operates from sensors in the engine room and will automatically re-
lease a clean-agent, gaseous chemical that does not leave residue 
behind. All boats have also been specified to carry a hand-held 2.5 
lb. monoammonium phosphate expellant (dry chemical) unit, which 
is rated Class A (trash, wood and paper), Class B (UL Approved) and 
Class C (energized electrical equipment). These units should be 
used in situations other than engine compartment fires. 
 
This is in addition to the suppression system in the engine compart-
ment. Hand-held units should be replaced or recharged as soon as 
possible after use, or after 12 years from the date of manufacture. 
In the event of any evidence of a fire within the engine compart-
ment, DO NOT OPEN THE ENGINE COMPARTMENT (BOX).  
Opening an engine compartment when there is indication of a fire 
inside can cause the fire to flare up and/or spread, which may result 
in extensive damage or even sinking of the boat and/or serious inju-
ry or death to people on board. Shut down the engine and blowers. 
Continuously discharge the entire contents of the fire suppression 
unit immediately. 

Summary of Contents for NXT20 2017















































































































































































































































Reviews:

No comments

Related manuals for NXT20 2017

ProBoat Classic Runabout EP RTR Instruction Manual preview
Classic Runabout EP RTR
Brand: ProBoat Pages: 4
BRP Sea-Doo FT Series Operator'S Manual preview
Sea-Doo FT Series
Brand: BRP Pages: 212
Hobie 16 Owner'S Manual preview
16
Brand: Hobie Pages: 36
Incept Tasman K40S Manual preview
Tasman K40S
Brand: Incept Pages: 8
S/C Yachts Yachts SC 420 Instruction Manual preview
Yachts SC 420
Brand: S/C Yachts Pages: 10
Walker Bay Airis Sport Owners & Safety Manual preview
Airis Sport
Brand: Walker Bay Pages: 18
Nauticstar XTS Series Owner'S Manual preview
XTS Series
Brand: Nauticstar Pages: 80
Cantiere Del Pardo Grand Soleil 46.3' Owner'S Manual preview
Grand Soleil 46.3'
Brand: Cantiere Del Pardo Pages: 98
KAYACAT PUMA Assembly Instructions Manual preview
PUMA
Brand: KAYACAT Pages: 26
Zodiac Wave Owner'S Manual preview
Wave
Brand: Zodiac Pages: 16
TOPCAT K3X Aassembly Instructions preview
K3X
Brand: TOPCAT Pages: 72
TRIBUTARY SPUD Owner'S Manual preview
SPUD
Brand: TRIBUTARY Pages: 6
TRIBUTARY Sawtooth II Manual preview
Sawtooth II
Brand: TRIBUTARY Pages: 6
Saturn TR430-DG Manual preview
TR430-DG
Brand: Saturn Pages: 8
Sea Eagle Boats SUPCat10 Instruction & Owner'S Manual preview
SUPCat10
Brand: Sea Eagle Boats Pages: 17
AquaCraft Mini Alligator Tours Manual preview
Mini Alligator Tours
Brand: AquaCraft Pages: 4
AquaCraft Rio 51 Manual preview
Rio 51
Brand: AquaCraft Pages: 24

Brands by name

Popular brands

Load more brands