manualshive.com logo in svg

MasterCraft NXT20 2017, Owner'S Manual

The MasterCraft NXT20 2017 is a high-performance watercraft engineered with precision and crafted for thrill-seekers. With its cutting-edge features and impeccable design, this boat guarantees an unforgettable experience on the water. To unleash the full potential of this exceptional watercraft, make sure to download the detailed Owner's Manual for free from manualshive.com.

Share
Download
background image

2017 OWNERS MANUAL / 

246

Location 

A rocker switch mounted to the throttle control panel. 

 

 

Operation

In all instances, the lights operate by using two position switches, 
one position for ON and the other for OFF.

 

TOWER DOME LIGHT

Models

 

Standard on ZFT7 towers, optional on ZFT4 towers.

Purpose 

 

The tower dome light illuminates the cockpit of the boat for use in 
low light situations or at night.

Location 

 

The tower dome light is mounted to the underside of the header box 
on the tower (directly below the tow point). 

 
MasterCraft boats should not be operated after dark, even with 
navigation lights on. The lights have limited range and luminosity. 
The boat may not be seen by other boat operations. In emergency 
situations or if an outing has not concluded prior to dark, use visual 
and sound signals to slowly return to shore. Attempting to operate 
at higher speeds may result in damage to the boat as the opera-
tor may not be able to see obstructions in the water or other craft. 
This is not covered under warranty. Also, serious injury or death to 
individuals may result.

ADDITIONAL SPECIAL NOTE:  In the ProStar model, if the boat is not 
equipped with tower lighting, the navigational lighting is valid for 
INLAND RULES ONLY.

Troubleshooting

If lights do not operate, check the main circuit breaker panel to de-
termine if a circuit may have tripped. Reset the circuit; if it continues 
to trip, take the boat to an authorized MasterCraft dealer.

If the circuit breaker has not tripped, the bulb may have burned out. 
Although some lights are LED, which rarely burn out, it is possible. 
Take the boat to an authorized MasterCraft dealer to have the bulb 
replaced. 

 

 

DOCKING LIGHTS 

Models

 

Optional on all X Series, XT Series and XStar models. 

Purpose 

 

Optional docking lights provide a significant aid to navigation in dark 
conditions. Docking lights are especially useful when pulling up to a 
dock or into a boat slip after dark.  

 

Location 

 

Two sets of bright LED lights mounted to the bow rub rail. 

 

Operation

 

A rocker switch mounted on the helm control panel turns the lights 
on and off. Press up on the switch to turn the lights ON (a green LED 
light will appear on the switch when the docking lights are on). Press 
down on the rocker switch to turn the docking lights OFF.  

 

Troubleshooting 

If the lights do not operate, check the main circuit breaker panel to 
determine if a circuit may have tripped. Although the docking lights 
are LED lights which rarely burn out, it is possible. Take the boat to 
an authorized MasterCraft dealer to have the bulb(s) replaced when 
necessary.

TOWER LIGHTS 

 

Models 

Optional on all X and XT Series and XStar models equipped with 
ZFT4 or ZFT7 towers,  
 

Purpose 

Tower lights may be white or blue LED lights. These lights add visual 
appeal as well as providing additional light to the area aft of the 
boat. This can assist operators in keeping an eye on wakeboarders 
and skiers. 
 

Summary of Contents for NXT20 2017















































































































































































































































Reviews:

No comments

Related manuals for NXT20 2017

Malibukayaks Express Owner'S Manual preview
Express
Brand: Malibukayaks Pages: 19
YAMARIN 600 Big Ride Owner'S Manual preview
600 Big Ride
Brand: YAMARIN Pages: 48
Boston Whaler 230 dauntless User Manual preview
230 dauntless
Brand: Boston Whaler Pages: 92
Coaster 600 BOW RIDER Owner'S Manual preview
600 BOW RIDER
Brand: Coaster Pages: 39
Four winns Horizon 210 Owner'S Manual preview
Horizon 210
Brand: Four winns Pages: 159
GALA C Series User Manual preview
C Series
Brand: GALA Pages: 10
PDQ Yachts 36 Capella Owner'S Manual preview
36 Capella
Brand: PDQ Yachts Pages: 66
Malibu Boats Boat 2003 Owner'S Manual preview
Boat 2003
Brand: Malibu Boats Pages: 76
Antares 44i Owner'S Manual preview
44i
Brand: Antares Pages: 118
Scarab SB Series Owner'S Manual preview
SB Series
Brand: Scarab Pages: 182
Mercury Optimax 150 Manual preview
Optimax 150
Brand: Mercury Pages: 86
GALA ATLANTIS Deluxe A300L User Manual preview
ATLANTIS Deluxe A300L
Brand: GALA Pages: 12
UIM 2013 P750 User Manual preview
2013 P750
Brand: UIM Pages: 17
WARRIOR BOATS Boats User Manual preview
Boats
Brand: WARRIOR BOATS Pages: 80
ISLAND PACKET 370 2008 Quick Start Manual preview
370 2008
Brand: ISLAND PACKET Pages: 8
Rave Sports Bongo 10 Owner'S Manual preview
Bongo 10
Brand: Rave Sports Pages: 20
Twin Anchors CruiseCraft IV Operating Manual preview
CruiseCraft IV
Brand: Twin Anchors Pages: 52
Z-pro PIONEER Kayak PIO340 Owner'S Manual preview
PIONEER Kayak PIO340
Brand: Z-pro Pages: 22

Brands by name

Popular brands

Load more brands