manualshive.com logo in svg

MasterCraft NXT20 2017, Owner'S Manual

The MasterCraft NXT20 2017 is a high-performance watercraft engineered with precision and crafted for thrill-seekers. With its cutting-edge features and impeccable design, this boat guarantees an unforgettable experience on the water. To unleash the full potential of this exceptional watercraft, make sure to download the detailed Owner's Manual for free from manualshive.com.

Share
Download
background image

2017 OWNERS MANUAL / 

114

This screen shows the Speedometer, Air Temperature, Water Tem-
perature, Battery Voltage, Water Depth and Engine Hours Gauges.    
 

NOTE: This screen is display only. There are no soft keys with it.

Cruise/Profile

 

 

The Profiles screen can be accessed by pressing the first Quick 
Access Key on the right side of the HV450.

 

This feature displays rider/user profiles for cruise controls based on 
user preferences for speed, ballast and smart plate settings.

Cruise/Profile Screen
Soft Key Commands

 

Use this key to access a list of preloaded pro-
files. Use the 

 or 

 to scroll through 

the list. Press 

 to select the outlined 

profile. 
Use this key to turn the cruise ON or OFF.  
This message will display when turning 
Cruise ON:  Speed Control has been enabled.   
This message will display when turning 
Cruise OFF:  Speed Control has been dis-
abled.
Use this key to increase set speed.

Use this key to decrease set speed.

Press and hold the Menu key to turn Auto 
Launch on or off.

Audio

Stereo display and functionality controls reside on the MasterCraft 
boat.  Here are a few screens available for viewing on the Stereo:

Fusion FM Channel  

            Fusion iPod Display

Fusion VHF Channel

Ballast and Trim

The Ballast and Trim screen can be accessed by pressing the 
second Quick Access Key on the left side of the HV450.

This screen shows the ballast tank fill and empty activity in addition 
to the trim tab levels. The only soft key on this screen is the Auto 
Launch/Exit key. Press this key to turn Auto Launch/Exit ON or OFF.

Gauges

 

 

Access the gauges screen by pressing the third Quick Access Key 
on the left side of the HV450.

Summary of Contents for NXT20 2017















































































































































































































































Reviews:

No comments

Related manuals for NXT20 2017

MACGREGOR 26X Owner'S Instructions Manual preview
26X
Brand: MACGREGOR Pages: 24
Sea Eagle RIB11 Instruction & Owner'S Manual preview
RIB11
Brand: Sea Eagle Pages: 13
Traxxas Spartan 57076-1 Owner'S Manual preview
Spartan 57076-1
Brand: Traxxas Pages: 30
Hobie Gateway Assembly Manual preview
Gateway
Brand: Hobie Pages: 20
Sea-doo 2004 3D RFI Operation Manual preview
2004 3D RFI
Brand: Sea-doo Pages: 118
X-TREME scooter X-Fish 151 User Manual preview
X-Fish 151
Brand: X-TREME scooter Pages: 30
Malibu Boats Boat 2003 Owner'S Manual preview
Boat 2003
Brand: Malibu Boats Pages: 76
Pelican Fishing Boat Owner'S Manual preview
Fishing Boat
Brand: Pelican Pages: 12
Hansa Sailing Liberty Rigging Manual preview
Liberty
Brand: Hansa Sailing Pages: 25
Ockelbo B21 CAB Owner'S Manual preview
B21 CAB
Brand: Ockelbo Pages: 70
Banzai WAVE CRUISER Instructions Manual preview
WAVE CRUISER
Brand: Banzai Pages: 10
Yamaha WaveRunner VXS 2012 Owner'S/Operator'S Manual preview
WaveRunner VXS 2012
Brand: Yamaha Pages: 98
Velocity 1995 Hunter 430 Operation Manual preview
1995 Hunter 430
Brand: Velocity Pages: 18
Meridian Yachts 2004 540 Operation Manual preview
2004 540
Brand: Meridian Yachts Pages: 33
MasterCraft CSX 220 2008 Owner'S Manual preview
CSX 220 2008
Brand: MasterCraft Pages: 77

Brands by name

Popular brands

Load more brands