Entrée Bath Gen III -
MODEL MB-68 AV-XL
MAINTENANCE MANUAL
10-20-19
Page 50 of 51
450 E 32
nd
Ave – Fremont, NE 68025
800-798-5867 FAX: 402-721-3023
www.mastercarebath.com
DOOR OPEN/CLOSE TRANSMITTER BUTTONS INSTRUCTIONS
(Part #706127):
Note
: Read and follow all instructions thoroughly. Refer to the drawing bellow to reference.
1.
Loosen and remove both thumb screws from the foot end control. Gently tilt the foot end control to the side.
2.
Loosen the strain relief. Remove the 1/8” tubing from the chrome raised transmitter to be replaced.
3.
Using large pliers loosen and remove the plastic nut from the bottom of the chrome raised transmitter to be replaced.
The chrome raised transmitter may now be removed.
4.
Insert the NEW chrome raised transmitter into the foot end control. Replace the plastic nut and tighten accordingly.
5.
Push the 1/8” tubing onto the chrome raised transmitter.
6.
Replace the strain relief and hand tighten.
7.
Gently tilt the foot end control back into place. Place the two thumb screws into the holes and tighten accordingly.
FOOT END
CONTROL
