Entrée Bath Gen III -
MODEL MB-68 AV-XL
OPERATION MANUAL
10-20-19
Page 18 of 51
450 E 32
nd
Ave – Fremont, NE 68025
800-798-5867 FAX: 402-721-3023
www.mastercarebath.com
FEATURES AND OPERATING CONTROLS
Mixing Valve:
Adjusts the temperature of the
mixer water to the shower Spray and tub fill
spigot. Turn counterclockwise for hotter and
clockwise for colder mixed water (accuracy
must be checked periodically per facility
protocol).
Tub Fill and Shower Spray Control Valves:
Turns ON/OFF and controls the flow of mixed
water to the tub fill spigot and shower Spray.
Digital Thermometers:
Digital readout
temperature of the mixed water to the shower
Spray and console (Preset at factory: Field
calibration maintenance, see maintenance
manual).
Emergency Door Open Button
and the Door
Open Button
at the same time
to open the
door
.
It will override the drain water sensors.
Door Open/Close Button:
To open door, press
and hold down the Door Open Button until the
door comes to a complete stop. To close the
door, press and hold down the transmitter
close button until the door comes to a
complete stop.
CAUTION: Check for obstructions in the
sensors, like wet clothes, foot, etc.
CAUTION: Door will not open if drain sensors
detect water in the tub unless the Emergency
Door Open Button is also pressed at the same
time.
CAUTION
:
Make sure the door comes to a complete stop to properly seal the
tub. Failure to do so may result in leaks. Contact Tech Support.
Service-End
Controls
Foot-End
Controls
Hand Lift
Control
FOOT-END CONTROLS
Mixing Valve
Reservoir Fill
Control Valve
Door Open
Button
Console
Controls
Tub Fill and
Shower
Spray
Shower Spray
Control Valve
Liquid Dispensing
Controls
Door Close
Button
Reservoir Water
Thermometer
Tub Water
Thermometer
Emergency Door
Open Button
In an EMERGENCY, Press
emergency Door Open Button and
Open Door Button to open door. It
Override the drain water sensors.
