Entrée Bath Gen III-
MODEL MB-68 AV-XL
10-20-19
Page 3 of 51
450 E 32
nd
Ave – Fremont, NE 68025
800-798-5867 FAX: 402-721-3023
www.mastercarebath.com
ARCHITECTURAL SPECIFICATIONS & ROUGH-IN INFORMATION
DIMENSIONS
Exterior Dimensions
Width
Door Closed ..................................................................................................................... 36"
Width
Door Opened ................................................................................................................... 34.25"
Width
Swivel Seat rotated out of the tub .................................................................................. 63”
Length
MB-68-AV (XL) Standard Wall Placement ....................................................................... 80"
Height
To top of Console ............................................................................................................ 72"
Interior Dimensions
Length-Straight .................................................................................................................... 51”
Length-Diagonal ................................................................................................................ 52”
Seat Depth
.............................................................................................. 22” at Widest Point
Seat Area Width (w/ Door Closed) ........................................................................................ 25”
Seat Height ..................................................................................................................... 20.5”
SPECIFICATIONS
Back Flow Prevention:
Double check valves for shower Spray complies with CSA B64.7, UPC, Certified to
NSF/ANSI 372, ASSE 1035 “Laboratory Faucet Vacuum Breakers”. Fill: 1.5” A gap above
rim complies with National Plumbing Standards. (See plumbing standards below.) Note:
The factory provided backflow prevention is the most widely accepted. Local codes may
require changes. The local plumbing contractor is responsible for any changes.
BathAire
(SM)
Outlets:
4 with 12 ports each for a total of 48 warm air massage outlets.
Capacity
500 lbs
Door Seal:
Seal certified by Warnock Hersey to the ASME A112.19.15-2005, CSA B45.0-02 (R2008)
and ANSI Z124.1.2 (2008) standards to ensure long lasting durability for bathtubs with
pressure sealed doors, Highly resistant to oils, detergents and all water conditions.
Electrical:
Factory provided on board installed dead front Ground Fault Circuit Interrupter (GFCI):
UL/CSA approved.
Installation Time:
4 hour (when water and electrical supplies meet the provided rough-ins.) Inspection and
Adjustments: 1/2 hour
Motor Specs:
Max Load: Push 4000 N, Power Rate: 24 V Max. 5.1 A, Duty Cycle: Max 10%, Max 2 min
/ 18min
BathAire
(SM)
Motor:
120 V, 11 Amp, 1.3 H.P. Variable speed with built-in 600 watt heating element for
maximum comfort and control.
Room Size:
11’ wide x 11’ long minimum recommended.
