Entrée Bath Gen III -
MODEL MB-68 AV-XL
OPERATION MANUAL
10-20-19
Page 35 of 51
450 E 32
nd
Ave – Fremont, NE 68025
800-798-5867 FAX: 402-721-3023
www.mastercarebath.com
SCALE SYSTEM
FUNCTION KEYS
Recall
: Used to recall last measurement. When pressed, the
last stable measurement will be displayed for 5 seconds.
On/Zero
: Used to turn on weight scale (if in sleep mode), or to
zero the scale (tare or minor offset adjustment).
lb/kg:
Used to select measurement units (pounds or
kilograms).
Up
: Used to request a lift upward motion.
Down
: Used to request a lift downward motion.
DISPLAY
Sleep mode
: A single dot " ." will be shown during sleep mode.
Sleep mode is entered after 20 minutes of scale inactivity.
Ongoing weight measurement:
Adding or subtracting weight
on the scale platform will cause a new weight measurement
process to be started.
During this process, the display will show "----" until a stable
weight measure is obtained. A person changing his/her
position on the chair or stretching an arm or leg will cause the
measurement process to take more time to complete.
Completed weight measurement
: Once a stable weight
measure is obtained, the weight will be displayed for 5 seconds
with a single digit precision, rounded to 0.5. Measurement
units can be changed using the "
lb/kg"
key.
Exception or errors: If tare weight is removed or if an upward
force is applied to the scale platform, "zero" will be shown on
the display. Use the "On/Zero" key to zero the scale, or remove
the upward force source.
If the applied weight exceeds the capacities of the scale
platform, "over" will be shown on the display.
OPERATION
a.
Before you transfer the resident on to the chair, be sure there is not object touching the chair, or anyone leaning
on the chair. Push ZERO button to zero out the weight of the chair.
b.
Raise Lift until resident’s feet are not touching the floor.
c.
Once the resident is transferred and secured onto the chair, wait until they are settled down and stable.
d.
The resident's weight will appear in the display automatically. Make sure no one is touching or leaning on the chair
including yourself during the weighting procedure.
e.
Record the weight.
Note: If you accomplish the above steps every time you weigh someone, you will help assure getting an accurate
weight.
CAUTION
: Do not push LB/KG and ON/ZERO buttons at the same time. Push all buttons with finger only. No pens
or sharp objects
Recall Button
On/Zero Button
lb/kg Button
Display
