8
Martin ERA 300 Profile user guide
Fixture overview
1 2
3 4 5 6 7
1 – Display
The display shows the fixture status and user setup menu. When DMX is not detected, the
display backlight will flash on and off.
2 - Buttons
MENU: Activate the menu mode, or return to the previous level of the menu structure.
DOWN: Decrease a parameter setting, or go down a menu branch.
UP: Increase a parameter setting, or go up a menu branch.
ENTER: Confirm the selected function.
Press and hold the MENU button to exit the menu mode.
3 - DMX XLR input plugs
3 and 5-pin XLR plugs are provided for the DMX input.
4- DMX XLR output sockets
3 and 5-pin XLR sockets are provided for the DMX output, to link through to the next fixture.
5 - Mains power input
A Neutrik powerCON TRUE1 input connector is provided to connect the fixture to mains
power.
6 - Mains power output
A Neutrik powerCON TRUE1 output connector is provided which can be used to supply
power to other fixtures. Please ensure you keep within the power limits listed in “Linking
fixtures to power in a chain” on page 11.
7 - Fuse
The T 6.3 A fixture fuse is located in a fuseholder next to the power input/output connectors.
Summary of Contents for ERA 300 Profile
Page 1: ...ERA 300 Profile User Guide...