6
Martin ERA 300 Profile user guide
The luminaire should be positioned so that prolonged staring into the luminaire
at a distance closer than 3.9 m is not expected.
Protection from injury
Fasten the fixture securely to a fixed surface or structure when in use. The
fixture is not portable when installed.
Ensure that any supporting structure and/or hardware used can hold at least 10
times the weight of all the devices they support.
If suspending from a rigging structure, fasten the fixture to a rigging clamp. Do
not use safety cables as the primary means of support.
If the fixture is installed in a location where it may cause injury or damage if it
falls, install as directed in this manual a secondary attachment such as a safety
cable that will hold the fixture if a primary attachment fails. The secondary
attachment must be approved by an official body such as TÜV as a safety
attachment for the weight that it secures, must comply with EN 60598-2-17
Section 17.6.6 and must be capable of bearing a static suspended load that is
ten times the weight of the fixture and all installed accessories.
Allow enough clearance around the head to ensure that it cannot collide with an
object or another fixture when it moves.
Check that all external covers and rigging hardware are securely fastened.
Do not operate the fixture with missing or damaged covers, shields or any
optical component.
Block access below the work area and work from a stable platform whenever
installing, servicing or moving the fixture.
Do not lift or carry the fixture by its head. Always ensure that the fixture is
supported by its base.
In the event of an operating problem, stop using the fixture immediately and
disconnect it from power. Do not attempt to use a fixture that is obviously
damaged.
Do not modify the fixture or install other than genuine Martin parts.
Refer any service operation not described in this manual to a qualified
technician.
Summary of Contents for ERA 300 Profile
Page 1: ...ERA 300 Profile User Guide...