4
Martin ERA 300 Profile user guide
Safety information
WARNING!
Read the safety precautions in this manual before installing, operating or
servicing this product.
The following symbols are used to identify important safety information on the product and in this
manual:
Warning!
Safety
hazard. Risk
of severe
injury or
death.
Warning!
Powerful
light
emission.
Risk of eye
injury.
Warning!
See user
manual for
important
safety
information.
Warning!
Hazardous
voltage. Risk
of lethal or
severe
electric
shock.
Warning!
Fire hazard.
Warning!
Hot surfaces.
Warning! Risk Group 3 (high risk) product according to EN62471. Possibly
hazardous radiation emitted from this product. May be harmful to the eyes. Do
not stare at operating lamp and do not view the light output with optical
instruments or any device that may concentrate the beam.
This lighting fixture is for professional use only and must be installed by a
qualified technician. It is not for household use. It presents risks of severe injury
or death due to fire hazards, electric shock and falls. It can create a fire hazard
or a risk of eye injury if the safety precautions below are not followed.
Install, operate and service Martin® products only as directed in their user
manuals, or you may create a safety hazard or cause damage that is not
covered by product warranties. Follow the safety precautions listed below and
observe all warnings in this manual and printed on the product. Keep this user
manual for future use.
For the latest user documentation and other information about this and all
Martin® products, please visit the Martin® website at http://www.martin.com
If you have any questions about how to install, operate or service the fixture
safely, please contact your Martin® distributor (see www.martin.com/distributors
for details) or in the USA on 1-844-776-4899.
Respect all locally applicable laws, codes and regulations when installing,
operating or servicing the fixture.
Protection from electric shock
Ensure that the fixture is electrically connected to ground (earth).
Disconnect the fixture from AC power when not in use.
Do not open the fixture or remove any cover. Refer any service operation not
described in this manual to an authorized Martin Service partner.
Shut down power to the entire installation at the main power distribution board
and lock out power before carrying out any installation or maintenance work.
Use only a source of AC power that complies with local building and electrical
Summary of Contents for ERA 300 Profile
Page 1: ...ERA 300 Profile User Guide...