Installation
11
To draw power from lighting track, a suitable power take-off plug from the
lighting track supplier must be installed on the power supply cable in
accordance with the lighting track supplier’s instructions.
Some common color-coding systems for mains wiring is given below:
When installing the female ENSTO connector on the power cable, note the
markings next to the screw terminals:
• The terminal marked
1
must be connected
to the live wire.
• The centre terminal marked
must be
connected to the ground (earth) wire.
• The terminal marked
N
must be connected
the neutral wire.
The following connectors and cables are available from your Martin dealer:
ENSTO 3-pole 16A/250V male connector . . . . . . . . . . . P/N 05347202
ENSTO 3-pole 16A/250V female connector . . . . . . . . . . P/N 05327202
ENSTO male/female cable (15 cm/5.9in.). . . . . . . . . . . . .P/N 11501019
Wire (EU)
Wire (US)
Pin
Marking
brown
black
live
“L” or “1”
blue
white
neutral
“N”
yellow/green
green
ground
Summary of Contents for Cyclo 03 Directional
