Martin Cyclo 03 Directional, User Manual

Page: 22 / 36

22 Cyclo 03 Directional user manual
The default factory-set control address is ‘1’.
To set the Cyclo 03 Directional’s DMX address:
1. Set DIP switch pin 10 to OFF.
2. Decide on a DMX address for the luminaire. If you are calculating the
DMX addresses for multiple fixtures, save time by using the online Martin
Address Calculator at
http://www.martin.dk/service/utilities/AddrCalc/index.asp (see illustration
below).
3. You can also look up DIP-switch settings using the Martin DIP Switch
Calculator, available for use and downloadable at
http://www.martin.dk/service/dipswitchpopup.htm
If you do not have Internet access, refer to
"Table 2: DIP switch address
settings " on page 23.
4. Set DIP switch pins 1 through 9 to ON (1) or OFF (0) with reference to
the table.