Martin Cyclo 03 Directional, User Manual

Page: 8 / 36

8 Cyclo 03 Directional user manual
A 3mm Allen key is required for this operation.
To mount a Cyclo 03 Directional on lighting track:
1. Isolate the lighting track from the power supply and ensure that power
cannot be reapplied, even accidentally.
2. Hold the luminaire up to the lighting track and slide the ends of the
mounting arms into the slot in the track.
3. Supporting the luminaire in position, fully tighten the 3mm Allen screws in
the side of each mounting arm.
4. Check that the luminaire is held firmly in place before reapplying power.
Lighting track dimensions
can vary slightly between
manufacturers. If the Cyclo
03 Directional is not held
firmly in place, you may need
t o r e p e a t t h e a b o v e
procedure, adding the square
spacers supplied with the
luminaire to take up any
c l e a r a n c e b e t w e e n t h e
m o u n t i n g a r m s a n d t h e
lighting track.