Martin Cyclo 03 Directional, User Manual

Page: 27 / 36

Service 27
4. The diffuser is held in place
by metal clips at each end of
the luminaire. Push a clip
back and remove the
diffuser. You now have
access to the tubes.
5. Pressing on the metal caps
at both ends of the tube, rotate
the tube 1/4 turn in whichever
direction is easiest, and slide
the tube’s terminal pins out of
their sockets. Support the tube
at both ends as it is released.
6. To install a new tube, line it up so that the manufacturer’s markings on all
tubes are at the same end of the luminaire. Slide the tube’s terminal pins
fully into their sockets and rotate the tube 1/4 turn to engage the pins.
Check that the tube is held securely in the sockets.
7. Replace the diffuser and then the reflector by pushing them onto their
clips before reapplying power.