WAC Lighting
www.waclighting.com
Phone (800) 526.2588 • Fax (800) 526.2585
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone (516) 515.5000 • Fax (516) 515.5050
Western Distribution Center
1750 Archibald Ave • Ontario, CA 91761
Phone (800) 526.2588 • Fax (800) 526.2585
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. JuLy, 2014
INSTALLATION INSTRUCTION
W Track Surface Mount 277V
WHT4, WHT8, WHT12
SAFETY INSTRUCTION
•
Read all of these instructions before installing the track system.
•
Turn off power at main switch before installing or modifying the system.
•
Do not install within 6 inches of any curtain or combustible materials.
•
Do not install less than 5 feet above a floor.
•
Do not install in damp or wet locations.
•
Do not install concealed, or extended through building walls.
•
Do not attempt to energize anything other than a track light fixture.
•
Do not connect a track to more than one branch circuit. Although track light system may seem to operate acceptably,
a dangerous overload of the neutral may occur and result in a risk of fire.
•
Check with a qualified electrician before wiring.
•
All of the installations shall be in accordance with NEC and all local codes.
•
Save these installation instructions and refer to them when additions or changes to the track configuration is made.
MOUNTING OPTIONS
A: Surface Mount
• Mounting slots can be knocked out and are spaced
every 12 inches for convenience.
• Mount track flush to the surface and secure screws
(included).
B: TOGGLE BOLT MOUNT
• Mounting slots can be knocked out and are spaced
every 12 inches for convenience.
• Hang track from the surface using toggle bolts (included).
C: T-Bar Mount
• Mounting slots can be knocked out and are spaced
every 12 inches for convenience.
• Fasten track to T-Bar using T-Bar clips (not included) .
