Martin Audio MLA MINI, Advanced User'S Manual

Page: 76 / 256

MLA Mini Advanced User Guide V1.0
76
MLA MINI
ADVANCED USER GUIDE
Step 2: Attach the suspension cable(s) to the Flying Frame using shackles.
If using single-point suspension, attach the chain hoist to the H13 suspension hole of the Flying
Frame and raise the MSX upwards. With two-point suspension, attach the hoists to the front and
rear suspension points. Raise the hoist(s); remove the wheelboard when it is clear of the ground.
Step 3: I f you are rigging a 4+1 array, proceed to Step 4. If you are rigging an 8+2 array, wheel
the second MSX sub into position so that its top face is aligned with the bottom face of the first
sub. Extend the dropdown brackets from the bottom of the first sub and engage them with the
four slots in the top of the second. Secure the dropdown brackets with Flying Pins. Raise the
hoists further to clear the wheelboard.
If you are rigging a 12+3 array, perform Step 3 once again, to attach the third MSX sub.